Bobcat Hydraulic Charge Pressure Repair Cost, Cheapest First
Bobcat charge pressure repair costs by cause: Bobcat-listed pump prices dated Oct 2, 2026, the bill formula, and when to repair or replace.
Table of Contents
Bobcat charge pressure repair costs, cheapest cause first
A Bobcat charge-pressure repair can run from a roughly $129 pressure switch to a remanufactured hydrostatic pump that Bobcat lists at $3,680.99–$4,993.49, parts only. Labor, fluid, filters and any flush are extra.
The cost ladder at a glance
| Cause | Parts price | Applies To |
|---|---|---|
| Hydraulic oil pressure switch (example: 6674316) | About $129 | T- and S-series; confirm by serial |
| Relief valve, belt, tensioner, hydraulic filter | Model-specific | |
| Gear pump, remanufactured | $936.49–$1,694.99 | Loaders; confirm by serial |
| Tandem or hydrostatic pump, remanufactured | $3,680.99–$4,993.49 | Loaders; confirm by serial |
Source: Bobcat Parts remanufactured pumps listing (30 of 78 items), retrieved October 2, 2026; switch from one US retailer listing, same day. Parts only; stock varies.
Which row are you on?
Machine down: “Rule out the cheap causes.” Pump quote in hand: “When it is the pump.” Machine’s worth: “Repair or replace.” Codes: see which charge-pressure codes apply to your serial number.
ℹ️ Safety Note: Hydraulic systems hold pressure after shutdown, and fluid from a pinhole leak can penetrate skin and needs immediate medical attention. Raised lift arms can also drop. Have a qualified technician do any testing or repair, following the service manual.
Parts prices by cause, with part numbers and dates
| Part | Type | Price | Stock | Applies To |
|---|---|---|---|---|
| 7233072REM | A22 tandem pump | $3,680.99 | In stock | SJC loaders |
| 7509445REM | Hydrostatic pump | $4,957.49 | In stock | Track loaders |
| 7010203REM | Piston pump | $2,768.99 | In stock | Loaders |
| 6679756REM | Gear pump | $936.49 | In stock | Loaders |
Source: Bobcat Parts remanufactured pumps listing, retrieved October 2, 2026. List prices, parts only. SJC = selectable joystick controls.
Switches, sensors and filters
Bobcat lists 6674316 as a hydraulic oil pressure switch for many T- and S-series loaders. One US retailer listed it at $128.99; aftermarket versions ran $38.85–$123.00 (retrieved October 2, 2026).
Gear pumps vs tandem hydrostatic pumps
Owner reports disagree on whether charge pressure comes from main-pump return oil or a pump inside the hydrostatic unit. Bobcat’s parts catalog for your serial settles which row applies.
New, remanufactured and core charges
Bobcat says its remanufactured pumps are fully disassembled, have wear parts replaced, and carry a 12-month warranty. Several tandem listings were out of stock.
Rule out the cheap causes before approving a pump
Owner reports follow a cost order: cheap checks first, pump last.
Fluid, filter and suction screen first
Reports on several models tie fine metal in the filter or oil to a failing pump; a technician confirms what it means. Oil level and filter cost least to check.
Belt-driven pumps: check the drive
Two T300 reports chased the belt and tensioner: one found a worn tensioner bearing and the code stayed; in the other the warning returned within an hour.
Sensor fault or real pressure loss?
A T250 owner’s new sender showed the same low reading, pointing to real pressure loss; a technician-answer site says sensor or wiring faults can also mimic the warning. Only a measured reading separates them. The M0514 code guide covers that code.
⚠️ Hazard: Charge circuits hold pressure, and a pinhole leak can inject fluid through skin. Never hand-check for leaks, hold a gauge on a live line, or work under a raised arm. A qualified technician does the testing.
✅ Do This: Ask a Bobcat-trained technician: “Did you measure actual charge pressure at the manual’s test condition for my serial before quoting a pump?”
📜 The Rule: OSHA’s lockout/tagout standards list places 29 CFR 1910.147 under general industry and 1926.417 (lockout and tagging of circuits) among construction entries (verified October 2, 2026). Which applies depends on shop versus construction work.
When it is the pump: the real bill, flush and labor included
A pump quote is one line of a longer bill.
The bill formula, line by line
🧮 Run the Numbers: Total = pump + (labor hours × shop rate) + fluid and filters + flush and other affected parts + freight − core refund + downtime cost. Price downtime with the Equipment Cost-Per-Hour Calculator.
Hypothetical, not market data: pump $3,680.99 (Bobcat 7233072REM) + 8 labor hours × $150 + $400 fluid and filters = $5,280.99, before flush, freight, core and downtime.
Why metal in the filter changes the quote
If metal has circulated, ask what else the quote covers and whether it includes a flush. One T300 owner reported spending $5,000 at a dealer before damage turned up in the pump’s rotating group.
Core returns and remanufactured vs new
A core charge is a deposit refunded when you return your old pump. One third-party seller lists part 6687863 at $3,250.00 plus an $800 refundable core; Bobcat lists it at $4,250.49 (out of stock). Compare net cost after core and warranty.
Repair or replace: when the bill approaches the machine’s worth
The itemized total only matters next to what the machine is worth.
Repair total vs machine value
Compare the repair total to the machine’s hour-value, not its age. Bobcat’s remanufactured pumps carry a 12-month warranty, but a pump does not change the condition of everything else.
🧮 Run the Numbers: Enter model, model year, hours, condition and repair total in the Used Equipment Hour-Value Estimator.
✅ Do This: Ask an equipment appraiser for a written value, and bring the itemized quote.
Renting a machine while yours is down
Rental rates vary by region and date; get written quotes for the days the repair needs.
Preventing a repeat: filters, fluid and what not to bypass
Prevention here means following the manual.
Service intervals from the OEM manual
Find yours in Bobcat’s operation and maintenance manuals for your serial, and see the guide to filter-plugged codes and intervals.
Why the shutdown stays in place
📋 Verified Spec: Bobcat’s S150 manual (S/N 526811001 and above) says an extremely low hydraulic charge pressure warning stops the engine in 10 seconds. Mirror copy, verified October 2, 2026; confirm against Bobcat’s copy.
🔍 Why It Fails: The shutdown responds to lost charge pressure. Disconnecting or overriding the sensor removes the warning without restoring pressure. This article does not cover bypasses; fix the cause.
Bobcat charge pressure repair FAQ
1. How much does a Bobcat hydraulic charge pressure repair cost?
Parts run from a roughly $129 switch to $3,680.99–$4,993.49 for remanufactured hydrostatic pumps (Bobcat, October 2026); labor and fluid are extra.
2. What is the cheapest cause of low charge pressure on a Bobcat?
A faulty pressure switch, about $129 for part 6674316 at one retailer; owner reports show some swaps change nothing.
3. How much does a Bobcat hydrostatic pump cost?
Bobcat lists remanufactured tandem and hydrostatic pumps from $3,680.99 to $4,993.49 on its first result page; fitment depends on serial number.
4. What does Bobcat say about remanufactured pumps?
They are fully disassembled, have wear parts replaced, and carry a 12-month warranty.
5. What is a core charge on a Bobcat pump?
A deposit refunded when you return your old pump; one seller lists $800 on part 6687863. Get Bobcat’s terms in writing.
6. Can a bad sensor cause a Bobcat charge pressure code?
Yes, a sensor or wiring fault can mimic it, but a new sender that changes nothing points to real pressure loss.
7. Does metal in the hydraulic filter mean a pump replacement?
Owner reports tie fine metal to pump failure, but a technician must confirm it. Ask whether the quote includes a flush.
8. How long can I run a Bobcat with a charge pressure warning?
Not long: Bobcat’s S150 manual describes engine shutdown within 10 seconds of an extremely low charge-pressure warning. Have a qualified technician diagnose it before restarting.
9. Is it worth repairing a Bobcat when the pump fails?
Compare the itemized repair total to the machine’s hour-value, not its age; an equipment appraiser can give a written value.
10. Can I bypass the Bobcat charge pressure shutdown?
No bypass is covered here; overriding the sensor removes the warning without restoring pressure. Repair the cause.
What to do next
Shut down on a charge-pressure code? Check any quote against the ladder above. Before approving a pump, ask a certified Bobcat technician for a measured charge-pressure reading and an itemized quote, then run the Used Equipment Hour-Value Estimator with model, hours and repair total. See which codes apply to your serial number.
Sources (retrieved October 2, 2026): Bobcat Parts remanufactured pumps listing; Bobcat Parts listing for hydraulic oil pressure switch 6674316; US retailer and aftermarket listings for 6674316; a third-party seller’s listing for part 6687863; Bobcat S150 Operation & Maintenance Manual (mirror copy); OSHA lockout/tagout standards page; owner-report threads on TractorByNet, HeavyEquipmentForums, SkidSteerForum and JustAnswer.
